
The short answer
Wind mitigation in Boca Raton is documented on the same state form used everywhere in Florida, OIR-B1-1802, but local homes tend to show a recognizable pattern. Most of the city's housing went up in the 1970s and 1980s, before the Florida Building Code, so the building code item rarely applies. Credits usually depend on the shape of Mediterranean-style tile roofs, the connectors in the attic, a documented re-roof and whether every opening, down to the pool slider and the garage door, is protected and verified.
Key points
- Boca Raton is in Palm Beach County, outside the HVHZ, so the Region item depends on the address.
- Census estimates put more than half of the city's homes in the 1970s and 1980s.
- Tile roofs with gable ends, towers or flat sections can miss the hip roof answer.
- For shutters and impact windows, association approval comes first, then the city permit.
- City permit records and product approvals often decide the roof covering and opening items.
In this article 12 sections
- Wind mitigation in Boca Raton: why local reports look alike
- How old are Boca Raton homes? What the Census shows
- Outside the HVHZ: what Boca Raton's side of the county line changes
- What Boca Raton homes typically show on the wind mitigation form
- Boca Raton roof types and how each one reads on the form
- HOA and condo approval for shutters and impact windows in Boca Raton
- City of Boca Raton building permits: where your records are
- How to prepare your Boca Raton home for the inspection
- Which upgrades change Boca Raton answers the most
- What the original version of this article got wrong
- Booking a wind mitigation inspection in Boca Raton
- The bottom line
Wind mitigation in Boca Raton: why local reports look alike
Wind mitigation in Boca Raton follows the same rules as anywhere else in Florida. The inspector fills in the nine items of form OIR-B1-1802 (Rev. 04/26), backs each attribute with a photo or document, and your insurer decides which windstorm credits apply. If you are new to the subject, start with our explanation of what wind mitigation means and why insurers credit it.
What makes Boca different is the housing. Large parts of the city were built in a short span of decades, in a handful of styles, under a code that predates the statewide one. Houses built that way tend to land on similar answers, for the same reasons, and they tend to improve through the same few upgrades. This guide walks through those patterns: what a typical Boca Raton home shows on the form, why it shows it, and which records or projects can change it.
It is meant to be read before you book, not instead of booking. When you are ready, our page on wind mitigation inspections in Boca Raton has the local details and the quote form.
How old are Boca Raton homes? What the Census shows
The U.S. Census Bureau's American Community Survey estimates how many homes in a city were built in each decade. Its 2024 one-year estimates count about 48,900 housing units inside Boca Raton's city limits. Roughly 13,000 of them were built in the 1970s and another 13,000 or so in the 1980s, so those two decades alone account for more than half of the city's homes. About 5,900 more date from the 1990s and about 8,200 from before 1970. Fewer than one in five, about 8,900 units, were built in 2000 or later.
Two cautions apply. These are survey estimates with margins of error, so read them as proportions, not exact counts. And they cover the city only. Many homes with a Boca Raton mailing address, including Boca West and other parts of West Boca, sit in unincorporated Palm Beach County and are not in these numbers.
For the wind mitigation form, the age profile matters because of item 1. A house only answers the building code item if its permit application falls under the Florida Building Code, which took effect on March 1, 2002, and the form adds stricter permit dates for houses finished in 2002 or 2003. By the Census numbers, the large majority of houses in the city were permitted earlier than that. On those homes, every credit has to come from the roof, the attic and the openings.
| Built | Homes in city limits (approx.) | Where you often find them | What usually shows on the form |
|---|---|---|---|
| Before 1960 | 2,700 | Early neighborhoods near downtown, including Mizner-era houses in Old Floresta | No building code answer; roof shape, later connectors and opening upgrades decide |
| 1960s | 5,500 | One-story subdivisions east of I-95 and near the Intracoastal | Connectors vary from house to house; openings often upgraded in stages |
| 1970s | 13,000 | Fast growth: subdivisions, townhomes and condo buildings | Association records for condos; the attic and the weakest opening for houses |
| 1980s | 13,000 | Planned and country club communities, many of them west of I-95 | Tile roof geometry, strap type and re-roof paperwork |
| 1990s | 5,900 | Later gated communities to the west | Still pre-code on item 1, with no SFBC-94 option outside the HVHZ |
| 2000s | 2,900 | The last large subdivisions and infill homes | Item 1 depends on the permit application date |
| 2010 and later | 6,000 | Newer condo buildings, infill homes and rebuilds | FBC 2007 or later on item 1; product approvals for every opening |

Outside the HVHZ: what Boca Raton's side of the county line changes
The Florida Building Code applies its High-Velocity Hurricane Zone to Broward and Miami-Dade only. Drive south across the Hillsboro Canal into Deerfield Beach and every house answers HVHZ on item 2. Stay in Boca Raton and the answer becomes Region 1, 2 or 3, read for the specific address from the ASCE 7-22 hazard tool. A Boca house from 1995 also cannot use the SFBC-94 building code answer that a Deerfield Beach house of the same age might have, because that answer exists only inside the HVHZ. Our Palm Beach County wind mitigation guide compares the two sides of the line in detail, and for the Broward view, see why Hollywood owners order the inspection.
The wind speed the city builds to
For permits, the City of Boca Raton refers applicants to a memorandum dated January 1, 2018 that sets the wind velocity used for single-family residences at 170 mph, with buildings treated as Exposure C unless Exposure D applies. That figure is a design value for permitting. It is not what the inspector writes on item 2, which comes from the hazard tool lookup for your address.
The design speed does explain why new windows and doors here must resist debris. The code's wind-borne debris region covers any area where the ultimate design wind speed is 140 mph or more, and land within a mile of the coast where it is 130 mph or more. A 170 mph design speed puts Boca Raton houses well inside that definition, so new and replacement glazed openings on them have to be impact resistant or protected, either by an impact-rated covering or, on some low-rise homes, by wood structural panels that meet the code. Older houses that have never had their openings replaced are a different story, and that is where a report can lose ground.
What Boca Raton homes typically show on the wind mitigation form
No two houses answer exactly alike, and we never fill in a box from the year built. Still, six patterns come up again and again on Boca Raton homes. Knowing them ahead of time tells you what to look for in your files.
Pattern01
No building code answer, even on a large, newer-looking house
A 1990s house behind a gate, with a three-car garage and a tile roof, can look recent. On the form it is a pre-code home, because its permit was applied for before March 1, 2002, and the HVHZ alternative is not available in Palm Beach County. That can surprise owners: item 1 simply does not apply. It does not mean the house is weak. It means the credits have to be proven feature by feature on items 3 through 9.
- Items
- 1
- What changes it
- Nothing for the original structure. A later re-roof or opening upgrade helps on other items
Pattern02
A hip roof in front, something else in back
Mediterranean and Spanish-style designs are common across Boca, and they often mix roof forms: a hip main roof with a gable over the family room, an entry tower, or a flat section behind a parapet over a loggia. On the form, a roof counts as hip only if other shapes make up no more than 10% of the total roof perimeter, so the inspector measures each segment rather than judging from the street. Porch and carport roofs attached only at the fascia or wall over open space are left out of the math. The slope item works on area instead: it asks whether at least two-thirds of the main roof is 6:12 or steeper, which stepped roof levels can tip either way.
- Items
- 3 and 7
- What changes it
- Only a change to the roof itself. The answer is a measurement
Pattern03
A re-roof on record, but an unknown water barrier
When a Boca home has been re-roofed, item 4 can often be answered from the re-roof permit and the tile's product approval. The water barrier under the tile is harder. Standard underlayment and hot-mopped felt do not qualify on item 8, and on a finished tile roof the inspector cannot see what was used from above. Unless the attic shows taped seams or foam, or the roofer's paperwork names a qualifying method, item 8 comes back unknown. Our guide to updating the report after a new roof lists what to ask the roofer for.
- Items
- 4, 5 and 8
- What changes it
- The roofer's documents, or the next re-roof done with a qualifying method
Pattern04
Different connectors at different ends of the attic
Boca houses grow. Florida rooms get enclosed, garages become bedrooms and second-story additions go up decades after the original house. Each phase can bring its own hardware, so the original trusses may sit in metal wraps embedded in the tie beam while an addition's rafters are toe-nailed or held by clips. Item 6 takes the weakest connection the inspector finds, leaving out hip and valley jack trusses within five feet of a roof corner. Tile roofs often sit over deep, hot attics reached through a garage ceiling hatch, so access can decide how much of the perimeter can be seen.
- Items
- 5 and 6
- What changes it
- Documented retrofit connectors, or better access to the parts nobody could reach

Pattern05
Impact glass in front, an original slider at the pool
Opening upgrades are often done in stages: the front windows first, then the bedrooms, with the wide sliders and French doors to the pool deck left for a later phase. On item 9 the weakest glazed opening sets the answer, so a single unprotected slider makes the whole house an X. Garage doors and entry doors without glass carry their own sub-level, and the 2026 form adds a Z answer for damaged openings that need repair. Our guide on which windows, doors and shutters qualify explains each level.
- Items
- 9
- What changes it
- Protecting the last unprotected opening, with labels and approvals kept

Pattern06
Condos and 55+ villas where the building answers
Boca has condo towers on the barrier island and downtown, low-rise buildings inland and villas inside club communities, including age-restricted ones. In a condominium, the roof, the trusses and much of the glass belong to the association, so the form largely describes the building and needs the association's records. In a villa or house under an HOA, the roof is usually yours but the shutters and windows still need the HOA's sign-off. Our article on the inspections a condo owner's insurer may ask for sorts out which items belong to whom, and a condo unit inspection covers the unit's condition if you are buying.
- Items
- Mostly 3 to 9, at building level
- What changes it
- Association projects and documents
Boca Raton roof types and how each one reads on the form
Concrete tile, in barrel and flat profiles, is common across the city, but it is often not the only covering on a house. Item 4 asks for every covering, with a permit date or product approval and an installation year for each, and one covering that falls short pulls the whole answer down.
| Covering | Where you see it | Items it affects most | What to keep |
|---|---|---|---|
| Barrel (S) concrete or clay tile | Mediterranean and Spanish-style houses, towers and entry features | 4 covering, 7 geometry, 8 water barrier | Re-roof permit, tile approval number and the underlayment method |
| Flat concrete tile | Planned-community homes and many re-roofs | 4 and 8 | The same papers as barrel tile |
| Asphalt shingle | Some older one-story homes and additions | 4, 5 and 8 | Permit, shingle approval and the deck nailing pattern |
| Standing seam metal | Some re-roofs and custom homes | 4 | Panel product approval and permit |
| Flat or low-slope membrane | Sections behind parapets, Florida rooms and covered patios | 4 and 7 | Its own permit, or proof it was part of the main re-roof |
Tile also changes how the roof is inspected. Concrete and clay tiles can crack under foot, so we keep walking on a tile roof to a minimum and document it from the eaves, a ladder, a drone where the airspace allows and the attic. If an insurer is asking about the age of an older tile roof as well, a roof inspection with a remaining life estimate answers that separately, and our article on roof certification for insurance explains what carriers usually want in writing.

HOA and condo approval for shutters and impact windows in Boca Raton
In a Boca Raton community with an association, an opening upgrade has two gatekeepers: the association and the city. Florida law limits how far the association can go. Under Section 720.3035(6), an HOA must adopt hurricane protection specifications that comply with the building code, and it cannot deny an application that conforms to them. Its specifications can set color and style, and it may require you to follow an existing unified building scheme. Condominium boards have a matching duty under Section 718.113(5). The order of work matters, because each step produces a document the wind mitigation form can use.
- Ask for the specifications. Request the association's hurricane protection specifications in writing before you collect bids, so every contractor prices products that match.
- Submit the application. Include the product brochure, the frame color and the product approval numbers. Keep the approval letter, because it is the first item in your opening protection file.
- Let the contractor pull the permit. The City of Boca Raton issues an over-the-counter permit for windows, doors or impact shutters on single-family homes. On its affidavit, the applicant confirms the products will be installed as their Florida Product Approval or Miami-Dade NOA specifies.
- Pass the city inspections. The city requires inspections on every window, door and shutter being installed, and complete product approvals for all products must be on site for the inspector.
- Keep the paper trail. File the permit, the final inspection result, the approvals and the invoice together, and leave the labels on the new glass.
- Update the wind mitigation report. Book the new inspection once the final inspection passes. The old report cannot show work that was not there when it was signed.
Condominium buildings follow a different permit route than houses, since the over-the-counter option is limited to single-family residences, and the association may install protection itself. Ask the manager whether a building-wide project is planned before replacing your own windows.

City of Boca Raton building permits: where your records are
Items 1, 4 and 9 lean on permit records, and Boca Raton keeps them in more than one place. The city's older permit history site covers permits up to February 13, 2023. Its newer system, Boca eHub, shows active permits from 2016 with the most current results, and public records can be searched there without an account by typing an address or application number. Records that were not active when the city switched systems were not carried into eHub; those, and a complete history from construction or annexation to the present, come through a public records request.
The city limits add a second layer. Homes in unincorporated West Boca have their permits with Palm Beach County, not the city. For a property the city annexed after it was built, the early permits may sit with the county and the later ones with the city, which is why the city's own permit search service tells owners to check the annexation date first and runs its searches by parcel control number and address.
| Record | Where to find it | Form items |
|---|---|---|
| Permits issued up to February 13, 2023 | The city's permit history site | 1, 4 and 9 |
| Active permits from 2016 on | Boca eHub, searchable without an account by address or application number | 4 and 9 |
| A full history from construction or annexation | A public records request to the City of Boca Raton | 1 |
| Permits for unincorporated West Boca | Palm Beach County Planning, Zoning and Building | 1, 4 and 9 |
| Product approval or NOA numbers | Contractor paperwork, invoices and labels on the product | 4 and 9 |
| Association approvals and specifications | HOA or condo management | 9 |
| Parcel control number and year built | Palm Beach County Property Appraiser | Needed for annexation checks and county searches |
Bring whatever you find to the inspection, even if it looks incomplete. A product approval number on an old invoice or a roofing contract that names the underlayment can be what turns an unknown into a documented answer. For a walk through every page of the finished form, see our guide to reading a wind mitigation report.
How to prepare your Boca Raton home for the inspection
A wind mitigation visit is short, but in Boca the access details can take longer to sort out than the inspection itself. A few days ahead:
- Call the gatehouse or register us in the community's visitor system, and ask about contractor hours or parking rules.
- If you are away for the summer, have your property manager or a neighbor let us in and sign the homeowner part of the form.
- Clear the garage below the attic hatch, and move cars if the hatch sits above a parking bay.
- Pull your permit history from eHub or the older permit site, or from Palm Beach County if you are outside the city limits.
- Find the HOA approval letters and product approval numbers for windows, doors, shutters and the garage door.
- Bring storm panels out of storage, or tell us where they are, so their labels and hardware can be photographed.
- Unlock side gates and the door to the pool enclosure, since rear sliders and French doors count as openings.
- Set out your last wind mitigation report and any FORTIFIED certificate for the house.
With access sorted, most single-family visits take under an hour, and the signed form usually arrives the same day.
Which upgrades change Boca Raton answers the most
Because the building code item is out of reach for most of the city's houses, the improvements that matter are the ones that change items 4 through 9. These are the projects that can change those items:
- Finishing the openings. Protecting the last sliders, the French doors and the garage door can be the single change that moves item 9 off X. A garage door counts when it is tested to ANSI/DASMA 115 and that can be verified.
- A re-roof done with the form in mind. A new tile roof brings a fresh permit for item 4 and the chance to renail the deck and add a qualifying water barrier for items 5 and 8. Ask the roofer to write the method into the contract.
- Roof-to-wall retrofits. Purpose-made connectors installed to the manufacturer's specifications, with site-specific documentation, can now be credited by their tested capacity. A re-roof, when the eaves are open, is the practical time to do it.
- A FORTIFIED certificate. A FORTIFIED Home Roof, Silver or Gold certificate can validate items 4 to 6 and 8 to 9 when attached to the form.
Roof geometry is the one item you cannot realistically change. Before spending money on any project, ask your agent how your carrier would credit the specific answer you hope to change.
What the original version of this article got wrong
This page replaces a 2023 article at the same address. Some of its claims were overstated or out of date, and they still show up in advice online, so here is the corrected version.
- "Florida homeowners are required by law to have windstorm insurance." Section 627.712 obliges the insurer: a residential property policy must include windstorm coverage unless the policyholder signs a written statement excluding it, and a mortgaged home also needs the lender's written approval for that exclusion.
- "A wind mitigation inspection increases your home's value." There is no reliable figure for that, and we will not invent one. The inspection documents features; what a buyer pays is set by the market, and what an insurer charges is set by its rates.
- "Buyers are looking for homes that have had the inspection." A recent report can help a buyer get an insurance quote that reflects the house, and a buyer may ask whether one exists. That is the honest version of the claim.
- "Over 14 years of experience." Global Home Inspectors has served Broward, Miami-Dade and Palm Beach since 2008, with owner Peter Lemos as its lead inspector.
- "The inspection covers wall-to-foundation connections." The form has no item for them. It looks at the roof system, the roof-to-wall tie and the openings.
- "The inspection will lower your premium." It documents what is there. Your insurer decides whether any answer earns a credit, under rates it files with the state.
Booking a wind mitigation inspection in Boca Raton
We work from our office in Hollywood and cover Boca Raton as part of our Palm Beach County service area, from the neighborhoods east of the Intracoastal to the club communities out west, whether the address is inside the city or in unincorporated county land. To book, use our Boca Raton wind mitigation page, or see all our inspections in Boca Raton if you also need a 4-point, a roof inspection or a full home inspection in the same visit. Several inspections can share one appointment.
The price depends on the size of the house, the attic and the number of openings, and you get a firm price by phone before anything is scheduled. Calls and texts to (954) 297-0317 are answered seven days a week, 5 AM to 10 PM. Nearby cities have their own pages too.
Wind mitigation inspections near you
The bottom line
Most Boca Raton homes reach the wind mitigation form with the same profile: built before 2002, outside the HVHZ, under a tile roof with a mixed shape and with openings upgraded in stages. That leaves the building code item empty and puts the weight on the roof records, the attic connectors and the last unprotected opening. Gather the permits, the association approvals and the product approvals before the visit, and the report will show everything the house really has. To schedule, send us a request or call (954) 297-0317, and read more about our wind mitigation inspections across South Florida.
Sources
- U.S. Census Bureau, American Community Survey 2024 1-year estimates, table B25034 (Year Structure Built), Boca Raton city, via Census Reporter
- City of Boca Raton: Over-the-counter permit affidavit for windows, doors or impact shutters, single-family residence
- City of Boca Raton: Permit History
- City of Boca Raton: Building Permit and Code Violation Search
- Uniform Mitigation Verification Inspection Form, OIR-B1-1802 (Rev. 04/26), Rule 69O-170.0155, Florida Administrative Code
- Florida Building Code, Building, 8th Edition (2023): Chapter 2 definitions (High-Velocity Hurricane Zone)
- Palm Beach County Planning, Zoning and Building: Wind Speed Maps and wind-borne debris region
- Section 720.3035, Florida Statutes: architectural control and hurricane protection in HOAs
- Section 627.712, Florida Statutes: residential windstorm coverage required
Laws, insurer rules and state programs change. This guide reflects these sources as of November 6, 2026.

